Product Description:
Heat pump water heater works on principle just like an air conditioner or like the refrigerator. It absorbs warmth from the air and transfer it to heat water. Hence it’s also referred to as air-source heat pumps. It operates on electricity but is more efficient than a conventional electric water heater.
GOMON high-efficiency all in one heat pump water heaters provide an energy efficient and innovative water heating solution for your house.

Enamel Water Tank Brings You Healthier Water Quality
High pressure and fatigue resistance which pass 280,000 times pulse test.
High corrosion resistance because enamel coating makes the welding line of steel plate seperate with water, so with long working life.
Our Porcelain enamel tanks approved by CE, WATER MARK, ETL, WRAS, EN12977-3.
High efficient Micro-Channel Heat Exchanger
Larger heat exchange area, Better heat transfer effect and More durable performance.
The Coefficient of Performance of the system can reach 4.25 even above.
Not touch with water in the water tank, so the heat exchanger has no risk of corrosion, scaling, leakage, etc.


Library Level 40dB Silence
Centrifugal fan, smooth air intake
Double plate air guiding, optimizing air duct
Double layer soundproofing, reducing radiation
Double piece evaporator makes it more optimized
High Efficient Compressor
Being internationally-renowned brand dedicated compressor for heat pump, it is more reliable in system matching and quieter in operation.
Intelligent Defrosting
With intelligent defrosting design, it can revolutionarily solve the bottlenecks of heat exchangers in cold winter such as frosting and slow heating, etc., allowing you to spend a more comfortable winter.
1:1 Gold Ratio
The unit and water tank are matched with a gold ratio to eliminate the phenomenon of disharmony, so that it is more energy-saving and professional.


Intelligent Control Electric Expansion Valve
The electric expansion valve can control the refrigerant volume more accurately to ensure the unit stay in the best state.
Smart and Convenient Touch Control
Intelligent light display
WIFI control










Technical Parameters:
Modelo | KRS38A-160V | KRS38A-200V |
Capacidad del depósito | 160L | 200L |
Material interior del depósito | Acero esmaltado (Acero BTC340R, 2,5 mm de grosor) | Acero esmaltado (Acero BTC340R, 2,5 mm de grosor) |
Carcasa exterior | Acero galvanizado pintado | Acero galvanizado pintado |
Presión nominal de trabajo del depósito | 0,8MPa | 0,8MPa |
Grado de impermeabilidad | IPX4 | IPX4 |
Condensador | Intercambiador de calor de microcanales | Intercambiador de calor de microcanales |
Elemento eléctrico Potencia | 2500W | 2500W |
Potencia nominal de la bomba de calor | 420W | 420W |
Potencia de la bomba de calor | 1780W | 1780W |
Máx. Potencia de entrada | 3200W | 3200W |
Capacidad de calefacción | 38L/H | 38L/H |
Máx. Temperatura del agua | 75℃ | 75℃ |
Tensión | ~220-240V / 50Hz | ~220-240V / 50Hz |
Refrigerante | R134a | R134a |
Policía | 4.25 | 4.25 |
Tamaño de entrada/salida | ¾" | ¾" |
Método de control | Touch screen | Touch screen |
Nivel de ruido | 40dB(A) | 40dB(A) |
Dimensiones | Ø525×1735mm | Ø525×1955mm |
How It Works:
All in one heat pump water heaters are solutions where the domestic hot water is heated by an integrated heat pump
- The fan inhales ambient air transferring its energy to the refrigerant agent in the evaporator thus changing from liquid to gas.
- The gas is further heated by compression.
- In the condenser the gas transfers its accumulated heat to the water tank. As it gets colder it transforms back to fluid. The pressure of the fluid is further reduced by the expansion valve.
- The electric back-up heating starts only when required during insufficient heat pump working conditions.


System Installation Diagram
Installation and Operation Manual:
Te puede gustar: