소형 히트 파이프 태양열 온수기

제품 설명:

This is a pressurized system, with the tank and heat pipe vacuum tubes combined. We call it compact heat pipe solar water heater. It’s one of the most effective solar heating system.the tap water piping is connected directly to the system, and water is fed automatically by the pressure. The vacuum tubes absorb the solar energy and transfer the heat to the tank through the copper pipe inside the tube, and the water inside the tank is gradually heated.

This system includes magnesium anode which is used for anti-corrosion, and an electric element which is used when cloudy or rainy . It also includes a P/T safety valve, when water inside the tank is overheated or water pressure exceeds 6 bar, the P/T valve will open automatically to protect the tank.

Product Features:

The enamel is coated inside the water tank which is of high corrosion resistance and of great pressure bearing. Our porcelain enamel tanks approved by CE, WATER MARK, ETL, WRAS, EN12977-3

The whole system approved by SOLAR KEYMARK (EN 12976 Standard)

High efficiency due to the best conduction performance. Heat pipe invacuum tube can transfer hot energy to cold water in pressurized water tank rapidly. No water in the glass vacuum tubes, one tube broken don’t influence the whole system working.

High Quality Parts:

Incoloy 800 Electric Element
CE Approved

실제 이미지 및 세부 정보:

Product Model	Aperture Area	Heat Pipe Tube			Capacity	Tank Dia.(mm)	Working Pressure
Product Model	(m2)	Heat Pipe Tube			(Liters)	Tank Dia.(mm)	(Mpa)
		Dia.	Length	Qty
		(mm)	(mm)	(pcs)
BRJ2-110-1.65-0.6-C	1.65	φ58	1800	12	110	φ360/φ460	0.6
BRJ2-135-2.20-0.6-C	2.2	φ58	1800	16	135	φ360/φ460	0.6
BRJ2-150-2.50-0.6-C	2.5	φ58	1800	18	150	φ360/φ460	0.6
BRJ2-170-2.80-0.6-C	2.8	φ58	1800	20	170	φ360/φ460	0.6
BRJ2-200-3.40-0.6-C	3.4	φ58	1800	24	200	φ360/φ460	0.6
BRJ2-250-3.87-0.6-C	3.87	φ58	1800	30	250	φ360/φ460	0.6
BRJ2-300-4.67-0.6-E	4.67	φ58	2000	30	300	φ360/φ460	0.6
Material Details
Water Tank	Inner Tank	Steel Plate With Enamel Coating(2.5mm thick)
	Outer Tank	Color steel plate(0.4mm thick)
	Insulation Layer	Polyurethane foam(50mm thick)
	Electric Heater	1.5KW(220V,50HZ)
Vacuum Tube	Glass	High-quality borosilicate glass3.3(1.6mm thick)
	Coating	SS-CU-AL-N/AL
히트 파이프		T2 구리(두께 0.7mm)
프레임		알루미늄 합금(3mm 두께)

작동 방식:

진공 튜브는 햇빛을 흡수하여 사용 가능한 열로 변환합니다. 두 유리 층 사이의 진공이 열 손실을 방지하여 열 손실 개선 효율을 높입니다. 열 전달 핀은 배기 튜브에서 구리 히트 파이프로 열을 전달하는 데 도움을 줍니다. 히트 파이프에는 소량의 액체가 들어 있어 가열되면 증기를 형성하여 저장 탱크의 물로 열을 빠르게 전달합니다.