air to water heat pump dimensions

When considering the installation of an air to water heat pump, one of the crucial factors to consider is its dimensions. The size and dimensions of an air to water heat pump can significantly impact its installation feasibility and efficiency. In this article, we will explore the dimensions of air to water heat pumps, including their height, width, and depth. We will discuss how these dimensions can vary based on the capacity and model of the heat pump, as well as the space requirements for installation. By understanding the dimensions of air to water heat pumps, homeowners and businesses can ensure they have adequate space and make informed decisions about selecting the right heat pump for their heating needs.

air to water heat pump dimensions

What is air to water heat pump dimensions?

In terms of physical size, your new air source heat pump is usually 1 to 1.5 meters tall and 0.5 to 1 meter wide, roughly the size of a standard washing machine.

They typically weigh between 60 and 100 kilograms, about the same as the average British adult.

기술 매개변수:

탱크 용량160L200L
내부 탱크 재질에나멜 처리된 강철
(스틸 BTC340R, 2.5mm 두께)
에나멜 처리된 강철
(스틸 BTC340R, 2.5mm 두께)
외부 케이스도장 아연 도금 강철도장 아연 도금 강철
탱크 정격 작동 압력0.8MPa0.8MPa
방수 등급IPX4IPX4
콘덴서마이크로 채널 열교환기마이크로 채널 열교환기
전기 요소 전력2500W2500W
히트 펌프 정격 입력420W420W
히트 펌프 출력1780W1780W
최대. 입력 전력3200W3200W
난방 용량38L/H38L/H
최대. 수온75℃75℃
전압~220-240V / 50Hz~220-240V / 50Hz
입구/출구 크기¾"¾"
제어 방법터치 스크린터치 스크린
소음 수준40dB(A)40dB(A)

Space need

Depending on the type of heat pump you want, the output power you need and whether you have an existing hot water storage tank, you need some outdoor and indoor space to install a new air source heat pump.

monoblock pump

Single heat pump only occupies the space outside the property. How much space the whole unit needs depends on its output, which directly affects the size of the unit. For example, if you live in a house with 2 -3 beds, you will need an integral heat pump with an output of 5-9 kW.

Split heat pump

The outdoor unit of split heat pump is usually smaller than that of single pump, but there are also indoor units. The size of the outdoor unit may also be related to the required output. For a 2-3 bed house with an output power requirement of 5-9kW.

What are the dimensions of a heat pump?

Heat pump size and location requirements-the physical size will vary according to the output and type, but it will be larger than the gas boiler with the same capacity. Generally, the size of a 12 kW (heated) single packaging unit is about 1500× 1200× 750 mm..

How do you size an air to water heat pump?

Generally, the bigger the house, the bigger the heat pump. Depending on the heat loss, building age and room type, a 100-square-meter house may need a 4kW ground source heat pump or a 5kW air source heat pump. For a house of 200 square meters, this is doubled to 8kW or 10kW respectively.

How much space do you need around an air source heat pump?

In order to obtain the best efficiency, it is best to leave at least 30 cm of space around the side and rear of the heat pump, and 1.5 m of barrier-free space in front.

Air to water heat pumps aredevices that use air to transfer energy and heat from one source to another. The size of air to water heat pumps varies depending on the size of the home it is being used for. Generally, these pumps are quite large, measuring from 3.2 to 4.8 feet in length, and from 2.4 to 3.0 feet in width and from 2.4 to 3.2 feet in height. Additionally, these air to water heat pump dealer can weigh anywhere from 200 to 300 pounds. As these devices are quite large, it is important to ensure that you have the space for them before purchasing. In conclusion, air to water heat pumps are able to efficiently transfer energy and heat, but they can be quite large, so it is essential to first consider the size of your home before purchasing one.